| Image |
Order No. - Name |
 |
Style 1A (lower image)
Suitable for up to 8” pots, has a central support designed with easy-drain diamond pattern. Useful for indoor growing, can be supplied with propagation dome (1b) to hold humidity for sensitive plants. Great for cuttings. Made from ABS.
Size: 10.5" x 42" x 4" - 27 x 107 x 10cm
Style 1B - Dome for FlowTray 1A (upper image, dome clips available - below)
Propagation dome for style(1a), made from clear PET (pop bottles material) and will last for years. 7” inside height.
Size: 10.5" x 42" x 7" - 27 x 107 x 18cm
|
 |
Style 2
Similar to (1a) and is set up to show your potted plants either for display or for sale.
Size: 10.5" x 78"x 4" - 27 x 198 x 10cm
|
 |
Style 3
Nine pads with ¾” drain channels between them support your pots or Rootrainers. Diamond-shaped grooves on top of the pads ensure that pots will not “mud-over” as they would on a flat surface. Drain spaces can be provided anywhere, usually centred 6” in from an edge, with a little depressed collection pocket for pipe connections. Some customers originally asked for corners to be flat, to aid in attaching a support table. We can give you either flat or grooved tops at the corners. Grooved tops give you the biggest surface area for pot- holding efficiency. Deeper sizes available - please specify your needs when you order.
Size: 35" x 45"x 4" - 89 x 114 x 10cm
|
 |
Style 4 - Mid Size
Similar to Style (3). It has seven diamond-grooved pads, a little wider at 5+ inches, and we can supply up to four drain spaces, and they can be anywhere, corners, middle of a side, offset to miss some interference under the bench--- whatever. This lets you custom-design your special FlowTray, yet keep the low price of a mass-produced item.
Size: 44.5" x 48"x 4" - 113 x 122 x 10cm
|
 |
Style 5A - Deep Tray (lower image)
Used mostly for holding cuttings of geraniums or exotic native plants (when seeds are somewhat chancey !) and there are drain spaces in the middle of the short sides. Diamond-grooved pads are about 3 inches wide and drain channels are 3/8” deep. Style (5a) trays are made of ABS
Size: 23" x 45"x 5" - 58 x 114 x 13cm
Style 5B - Dome for 5A (upper image, dome clips available - below)
7” high dome made of PET (similar to(1b))
Size: 23" x 45"x 7" - 58 x 114 x 18cm
|
 |
Style 6 - Large Tray
A little smaller than 4 feet by 8 feet, and fits into places that are built on this module but thicknesses of walls, etc. don’t provide sufficient space. Fifteen pads, 3”+ wide with ¾” drain channels between them. Drains anywhere. May be customized at no additional charge.
Size: 44.5" x 78"x 4" - 113 x 198 x 10cm |
 |
Style 7 - Medium Tray - DISCONTINUED
Custom sizes are available to suit your specific needs.
Example: We produce trays that are dimensioned (inside, bottom- 13”x 25” and 7” deep) for some container systems in which the holding frame is 12”x 24”, which allows you to use common flood and drain techniques.
Size: 44.5" x 67"x 4" - 113 x 170 x 10cm |
 |
Style 8A - Starter Tray
Measuring 20” square inside, with four diamond grooved pads measuring 4” wide with 3/4” drain channels, and a main entrance/drain in the middle of one side, about 4” square, suitable for drain attachment. This style is useful for a lab, where drainage material analyses are to be done.
Size: 24" x 24"x 4" - 61 x 61 x 10cm
Style 8B - Dome for 8A (upper image, dome clips available - below)
7” high clear PET plastic dome for propagation or rooting from cuttings.
Size: 24" x 24"x 4" - 61 x 61 x 18cm |
 |
Style 9 - Air Pruning Tray
Size: 42" x 50"x 4" - 107 x 127 x 10cm
|
 |
Style 10 - Meter Wide Tray
Size: 39" x 75"x 4" - 100 x 190 x 10c
|
|
Dome Clips for 1B, 5B, 8B
|
